Automatic bending elbow machine_Cangzhou City Mechanical Equipment Co. Ltd

Product Center

ELBOW MACHINE

Current position: HOME> Mechanical equipment>

Automatic bending elbow machine

Mechanical parameters

Cold forming elbow machine

Model	Diameter Range	Clamping Force(KN)	Main Thrust (KN)	Working Pressure(MPa)	Motor Power (KW)	Weight (T)
BH-100T	1/2 " ~3"28	1000	630	25	11	7
BH -160T	1 "~4 "28	1600	1000	25	14	11
BH-300T	2 "~6 "	3000	1500	25	18.5	15
BH -400T	4 "~8 "	4000	2000	25	22	21
BH -500T	5 "~10 "	5000	2500	25	30	32
BH -800T	6 "~12 "	8000	4000	25	44	41
BH -1000T	12 "~16 "	10000	5000	25	50	57
BH -1600T	16 "~20 "	16000	8000	25	65	90
BH-2300T	16“—24”	23000	12000	25	80	120

Mechanical video

Equipment details

Bending elbow machine pushing elbow method:

1. The material for hot push, push machine head or is a horn core mandrel, mandrel from fine to coarse, elbow bend machine automatically push system process is a process with a curved hole diameter, back support, under the section through the mandrel, behind a memorial arch frame will be fixed mandrel, one of the car, the car some through hydraulic transmission, some mechanical transmission by screw drive, and then push the car, the car pushes down the mandrel pipe, outside the core rod, induction coil, there is a heat pipe, heat is good, and then push the pipe under the car, good processing a bend.

2. In the hardcover process, after shot peening, the iron scale on the inner and outer surface of the elbow is removed, and both ends are beveled to facilitate welding.

3. The automatic elbow machine should select the specifications before pushing the elbow, put forward the pipe material, such as the elbow of 90 degrees, through its curvature can calculate how much material can be processed into the elbow of 90 degrees, and then cut with the length as the ruler

4. Push, elbow to plastic under thermal state, because of some elbow after improper handling will be distorted, this is not standard non-standard products, in addition push the good elbow are generally large front end diameter, through plastic mould for plastic, plastic mould is press actually, want to have a set of mould, two and a half arc, the upper one, after the plastic outer diameter of the size of the finished product.

Related equipment