Before operation of pipe bender

Before operation of pipe bender  

Before the operation of pipe bender, please check whether the lubrication points of the machine are short of oil, whether the safety protection device is reliable, and whether the movement mechanism is loose. After confirming the completion of the operation, please carry out the operation.  When the pipe bender starts the oil pump, it is necessary to check whether the system pressure is kept within the specification range. If it is high, the hydraulic components will be damaged, the power will be wasted and the work will be seriously affected.  Adjust the position and Angle required by the parts of the pipe bender, and adjust the length required by the pipe bender during operation.  The operation of the pipe bender shall be carried out when all inspection is completed.  

The new type of pipe bending machine has good precision, high safety performance, and is simple in operation and operation. The new type of pipe bending machine adopts a controller to control the electric push rod, and the electric push rod drives a connecting rod mechanism connected with the screw, so that the screw turns, so that the blade bracket moves, and the knife edge clearance meets the requirements.  

The knife edge gap of the new type pipe bender is more precise, the new type pipe bender has mobile clamp head, the clamp head device is in the front of the machine head, the new type pipe bender clamp head is automatic, so the new type pipe bender is simple in operation and easy to produce.  

Pipe bender is suitable for alloy steel, carbon steel, stainless steel and other materials.  The elbow produced by the pipe bender is an important equipment for the construction engineering in the fields of petrochemical industry, electric power and so on.  The bending machine equipment to produce bending pipe is to put the bending pipe bent on the bending machine. By rotating the rocker arm, the bending radius of the bending pipe is set. Then, the steel pipe is heated to a certain temperature with the intermediate frequency induction heating coil and the rocker arm is used to rotate.