The disassembly process of hydraulic cylinder of pipe bender

The disassembly process of hydraulic cylinder of pipe bender  

The disassembly process of hydraulic cylinder of pipe bender: First of all, you should know the hydraulic cylinder you need to disassemble, and map it before disassembly.  Prepare for later assembly.  Watch the oil opening position and placement size.  The next step is to remove the cylinder bottom, cylinder head and guide sleeve.  Remove the piston rod from the cylinder, in order to prevent the piston rod impact injury, remove the piston.  The piston is usually thread contiguous, but there will be a stop thread, to remove the stop screw, in order to remove the seal ring.  When a hydraulic system has multiple hydraulic cylinders, it is necessary to connect what kind of valve at the pump outlet.  It is best to install a solenoid valve, which can control the pressure of your whole system. When the pressure of the cylinder rises above the nominal pressure, it can open the pressure relief. Under the nominal pressure, the valve can be closed and the hydraulic cylinder can be used normally.