Maintenance steps of medium frequency pipe bender

Medium frequency pipe bending machine is an important metal processing equipment, in the production process needs regular maintenance to ensure its normal operation and extend the service life. The following are the detailed steps to maintain the medium frequency pipe bender:

1. Clean the external surface: Use a soft cloth or brush to clean the external surface of the medium frequency pipe bender and remove dust and oil. Ensure the appearance of the device is clean.

2. Check the power cables and electrical system: Check whether the power cables are damaged or aged, and ensure that the electrical system is securely connected. If any problem is found, it should be repaired or replaced immediately.

3. Lubrication system: Check the working condition of the lubrication system, including the amount and quality of lubricating oil. If needed, add or replace lubricating oil and clean lubricating lines.

4. Check the cooling system: check the water level and quality of the cooling system. Make sure the pump is running properly and clean the cooling lines and coolers.

5. Check the transmission system: check the belt, chain and bearing in the transmission system. Make sure they are not loose or worn, and perform necessary maintenance or replacement.

6. Check the control system: check the control system of the medium frequency pipe bender, including buttons, switches and sensors. Make sure they work properly and make necessary cleaning and adjustments.

7. Check the countertop: check whether the countertop is flat and not dented or damaged. Replace if necessary.

8. Check the working fixture and mold: check the wear of the working fixture and mold. Repair or replace if necessary.

9. Check the stability: check the stability device of the medium frequency pipe bender, such as the emergency stop button, protective cover, etc. Make sure they work properly and make necessary adjustments and replacements.

10. Check the pneumatic system: check the working condition of the pneumatic system, including pressure and gas pipe connection. Clean, maintain and replace as needed.

11. Check the hydraulic system: check the working condition of the hydraulic system, including the amount and quality of hydraulic oil. Add, replace and clean as needed.

12. Check the heating system: the working condition of the system, including the heater and temperature controller. Make sure they work properly and make necessary maintenance and adjustments.

13. Check the gas system: check the working condition of the gas system gas pipeline and gas pressure. Clean, maintain and replace as needed.

14. Check the machine structure: Check the machine structure of the medium frequency pipe bending machine, including guide rail and slide block. Make sure they work properly and perform necessary lubrication and maintenance.

15. Check stability protection medium frequency pipe bender stability protection facilities, such as protective doors, warning lights, etc. Make sure they are in good condition and working properly.

The above are the general steps for the maintenance of the medium frequency pipe bender, and the specific operation should be carried out according to the actual situation of the equipment and the guidance of the manufacturer. The goal of maintenance of medium frequency pipe bender is to ensure the stable operation of equipment, improve production efficiency and extend service life

For more information about medium frequency pipe bending machine, please pay attention to our website:http://www.aocmachine.com/