Operation technology of medium frequency pipe bending machin

Medium frequency pipe bending machine is a kind of technical equipment for bending metal pipes. It uses medium frequency electromagnetic induction heating technology to heat the metal pipe to a certain temperature, and realizes the bending of the pipe through the action of mechanical force. The operation of intermediate frequency pipe bending machine needs to master certain techniques and precautions, the following I will introduce the operation technology of intermediate frequency pipe bending machine in detail.

First, stable operation

1. Preparation: Before the operation of the medium frequency pipe bender, ensure that the equipment is in normal working condition, check whether the power supply is normal, and whether the mechanical parts are firmly installed. At the same time, it is necessary to properly wear personal protective equipment, such as gloves and goggles.

2. Power access: Connect the medium frequency pipe bender to the power supply correctly, and check whether the voltage meets the requirements.

3. Operating space: Ensure that the operating space is clean and spacious, and away from flammable, explosive and other dangerous goods.

2. Set operation parameters

1. Temperature control: Set the appropriate heating temperature according to the material and diameter of the metal pipe. In general, thinner tubes require lower temperatures, and thicker tubes require higher temperatures.

2. Bending Angle: Adjust the position and Angle of the bending mold according to the bending Angle needed. Ensure that the contact surface between the mold and the pipe is sufficient and conforms to the expected bending Angle.

3. Operation steps

1. Heating the pipe: Correctly place the pipe to be bent into the bending mold, and keep the pipe in good contact with the mold. Start the medium frequency pipe bending machine, adjust the heating time and power, so that the metal pipe is evenly heated to the set temperature.

2. Bend the pipe: When the pipe reaches the set temperature, by operating the handle or control button, the mold begins to apply force to bend the pipe to the expected Angle. During the operation, it is necessary to maintain the uniform application of force to avoid excessive or insufficient.

3. Cooling pipe: After bending is completed, turn off the heating power and stop applying force. Wait for the pipe to cool to room temperature, you can use natural cooling.

Fourth, equipment maintenance

1. Cleaning and maintenance: regularly clean the inside and outside of the medium frequency pipe bender to ensure the normal operation of the equipment. In particular, attention should be paid to cleaning the heating coil and mold to prevent the adhesion of debris affecting the heating effect and bending quality.

2. Lubrication maintenance: Regularly lubricate the mechanical parts of the medium frequency pipe bending machine to maintain the flexibility and life of the equipment.

3. Troubleshooting: If the equipment is faulty or abnormal, it should be stopped in time to check, and then operate after troubleshooting.

Summary: The operation technology of medium frequency pipe bending machine needs to master the knowledge of stable operation, setting operation parameters, operation steps and equipment maintenance. Mastering these technologies can ensure the normal operation of the medium frequency pipe bending machine and the high quality bending of the metal pipe. I hope the above content will help you!

For more information about medium frequency pipe bending machine, please pay attention to our website: http://www.aocmachine.com/