The cleaning of medium frequency pipe bender is very importa

Medium frequency pipe bending machine is a kind of mechanical equipment for bending metal pipes, which is widely used in various industrial fields. In order to ensure the normal operation of the medium frequency pipe bender and extend its service life, regular cleaning is very important. This paper will introduce the cleaning methods and steps of the medium frequency pipe bender in detail.

First of all, before cleaning the medium frequency pipe bender, it is necessary to ensure that the equipment is in the shutdown state and disconnect the power. Next, follow these steps to clean up:

1. Clean the outer surface of the pipe bender: Use a clean and soft cloth to clean the outer surface of the pipe bender. You can scrub with water and neutral cleaners, but care should be taken to avoid water entering the inside of the equipment. Wipe down each part carefully when cleaning, making sure to remove all dirt and dust.

2. Clean the inner part of the bend: First, open the cover of the device and carefully check whether there is foreign matter or residue inside. If necessary, use a vacuum cleaner or brush to clean the interior. At the same time, it is also necessary to check whether the drainage and ventilation holes of the equipment are smooth, and clean up in time if there is blockage.

3. Clean up the lubrication system: the lubrication system of the medium frequency pipe bender is the key to maintain the normal operation of the equipment. Regularly clean the oil and impurities in the lubrication system to ensure the quality of lubricating oil. You can use compressed air to purge tubing and oil holes in the lubrication system to remove clogs. Then, replace or refill the lubricating oil according to the equipment and requirements.

4. Clean the transmission: the transmission system of the medium frequency pipe bending machine is composed of various chains, gears and belts, and it is very important to clean and lubricate the transmission parts regularly. Use a brush or cloth to clean oil and impurities on the chain and gear, and apply appropriate amount of lubricating oil. At the same time, check whether the transmission parts are loose or worn, and repair or replace them in time if necessary.

5. Check and clean the control system: the control system of the medium frequency pipe bending machine includes electrical components and touch screen, etc. It is necessary to check and clean regularly to check whether the electrical components are damaged or loose, clean fingerprints and stains on the touch screen, and ensure that the operation interface is clear and sensitive.

6. Clean the tools and molds: The tools and molds of the medium frequency pipe bending machine are the key components directly involved in the bending process, and need to be cleaned and maintained regularly. Remove the tool and mold, clean it with detergent and brush, remove the metal chips and dirt on it, and then apply the right amount of lubricating oil to ensure the flexibility and durability of the tool and mold.

7. Check the safety equipment: The safety equipment of the medium frequency pipe bending machine includes the emergency shutdown switch, protective cover, etc., which needs to be checked regularly and ensure that it works normally. Check whether the switch and button are sensitive, whether the protective cover is intact, if there is damage or failure to repair or replace in time.

Cleaning the medium frequency pipe bender is an important step to ensure that the equipment is running and extend the service life. Regular cleaning can keep equipment clean and hygienic, reducing the possibility of failure. At the same time, the cleaning process is also part of the peacekeeping maintenance of machinery and equipment, which can find and solve some potential problems in time to improve the efficiency and safety of equipment. Therefore, it is necessary to pay attention to the cleaning work of the medium frequency pipe bender and strictly follow the above steps.