Chinese | English
610 t machine
Mechanical parameters
Processing range |
1/2”—4” |
1”—6” |
2”—8” |
3”—10” |
4”—12” |
5”—16” |
8”—20” |
Tee thickness |
Sch40 |
||||||
Max.pressure |
31.5MPa |
||||||
Working pressure |
25 MPa |
||||||
Working speed |
0—1000mm/min |
||||||
Return speed |
1500—2000mm/min |
||||||
Side cylinder diameter |
360mm*2 |
450mm*2 |
550mm*2 |
650mm*2 |
750mm*2 |
850mm*2 |
950mm*2 |
Side cylinder stroke |
300mm |
350mm |
400mm |
450mm |
500mm |
550mm |
600mm |
Side cylinder tonnage |
250T*2 |
400T*2 |
600T*2 |
850T*2 |
1100T*2 |
1400T*2 |
1600T*2 |
Master cylinder diameter |
400mm |
500mm |
600mm |
700mm |
800mm |
900mm |
1000mm |
Master cylinder stroke |
350mm |
400mm |
500mm |
600mm |
700mm |
800mm |
900mm |
Master cylinder tonnage |
315T |
500T*2 |
700T |
1000T |
1200T |
1600T |
2000T |
The motor power |
50kw |
55kw |
65kw |
75kw |
100kw |
120kw |
170kw |
Mechanical video
Equipment details
610 tee machine
Tee machine advanced technology using tap water to squeeze straight pipe into three, reduce lead filling, repairing lead blank, drilling, lead back and other processes, save costs and production time, in order to ensure the stability of water pressure, we use pressure balance to stabilize the water pressure in the copper pipe squeeze three, so that the copper pipe in the extrusion process to maintain a constant pressure;Both sides of the cylinder to adjust the synchronization performance, we also use the synchronizer to synchronize the two sides of the cylinder, so as to achieve a higher rate of finished products (can process the diameter of more than 7 mm copper pipe, pass rate of more than 98%, molding cycle of about 10 seconds/time).
The three-way machine is used for the formation of the three-way, the main power is the hydraulic cylinder.The three-way machine itself is a non-standard product, so there is no specific specification and model, we can directly customize according to customer requirements.We can do both the diameter of the tee from 21mm to 630mm and the wall thickness from 3mm to 20mm.
Three - way machine manufacturer is commonly used hydraulic three - way machine equipment manufacturers, mainly produce and manufacture a variety of mechanical equipment.
It is suitable for the common hydraulic press which is made of carbon steel and stainless steel pipe. It is suitable for the extrusion molding of all kinds of three-way pipe fittings to change the position of side cylinder. It can process and manufacture 90-degree, 135-degree and other angles of three-way pipe fittings.
2012