Common hydraulic pipe bending machine_Cangzhou City Mechanical Equipment Co. Ltd

Product Center

PIPE BENDING MACHINE

Current position: HOME> Mechanical equipment>

Common hydraulic pipe bending machine

Mechanical parameters

Intermediate frequency pipe bender

Specifications of the pipe bending machine are listed in the table below. In addition to the models listed in the table, we can also offer customized pipe bending equipment.

Processing range	1”—8”	3”—16”	8”—24”	16”—30”	20”—36”	24”—40”	30”—48”	32”—56”	36”--64”
Pipe thickness	Sch40
Max.pressure	31.5MPa					Chain-Drive Pipe Bending Machine
Working pressure	25 MPa					Chain-Drive Pipe Bending Machine
Working speed	0—1000mm/min					0—1500mm/min
Return speed	1500—2000mm/min					2000—3000mm/min
Cylinder Diameter	125mm*2	140mm*2	180mm*2	200mm*2	250mm*2	Compared with hydraulic pipe bender.the chain-drive pipe bending machine has the following features: 1.Stroke is arbitrary due to chain drive; 2.Space-saving; 3.Low-cost
Cylinder stroke	3000mm	4000mm	5000mm	8000mm	8000mm
Cylinder thrust	30T*2	38T*2	63T*2	78T*2	120T*2
Motor power	13kw	18.5kw	24kw	28kw	32kw
Transformer required for quenching	500kwa	1000kwa	1000kwa	1500kwa	2000kwa	2500kwa	3000kwa	3500kwa	4000kwa
IF power supply required	160kwa	250kwa	300kwa	500kwa	600kwa	600kw	800kwa	800kwa	1000kwa

Mechanical video

Equipment details

Common hydraulic pipe bending machine is divided into two types: unidirectional and bidirectional. In order to allow for installation errors, either unidirectional or bidirectional, you can choose a spherical aligning spherical seat or a spherical seat with a spherical ring. Usually push elbow with high quality steel material, even if the bearing life up to 80% longer ultra-clean steel. The greatest advantage is high grease technology - NSK's lubricant technology extends the life of greases and improves the performance of bearings. High grade steel ball - quiet and smooth at high speed. Using the ring in the selection, the installation error can be allowed.

Application of common hydraulic pipe bending machine: it is only suitable for bearing one side axial load, low speed parts, such as crane hook, vertical water pump, vertical centrifuge, jack, low speed reducer, etc. The shaft ring, seat ring and rolling body of the bearing are separated and can be assembled and removed separately.

Related equipment