elbow machine is mainly used for carbon steel and alloy steel price of elbow forming, if you need the product is stainless steel elbow, please select cold push elbow machine equipment mainly include: frame, main oil cylinder plate (including the main oil cylinder), active pushing plate, the plate before, semi-automatic feeding mechanism, intermediate frequency adjust coil frame (including intermediate frequency heating coil), intermediate frequency power supply, electric control system, etc.

Raw material steel tubes are seamless steel tubes, welded steel tubes and rolled steel tubes.

The equipment can produce elbow product specification range: 21mm ~ 1620mm;Wall thickness: 5mm ~ 120mm Angle: We can adjust and customize according to customer requirements

Set the cut raw materials on the elbow mold core rod, put the intermediate frequency induction line trap at the end of the elbow mold core, start the cooling water pump and intermediate frequency power supply, heat the raw materials to about 800°C, then start the pushing machine to push the elbow.

Select the main push pump according to the pushed elbow, select the feeding speed, the sluice gate and the mandrel to be heated to the working temperature, and start pushing. During the working, the pushing speed can be adjusted. Push to the middle point, the pusher stops automatically, the hydraulic sluice gate dies, the mandrel is loaded, release the sluice gate and go back to the end point.Note: when the main pump work can be used at the same time, generally only one can be used.It can also be used to step back without stopping.The back pump cannot be used at the same time, only one can be started and the other can be used as a backup.Feeding pump can only be used when feeding.The safety pressure of the hydraulic system of the main oil pump shall be set as, and the safety pressure of the hydraulic system of the auxiliary oil cylinder shall be set as.