Chinese | English
Hydraulic elbow press
Mechanical parameters
model |
1”—6” |
3”—12” |
8”—24” |
16”—30” |
20”—36” |
30”—48” |
32”—56” |
Maximum elbow wall thickness |
Sch40 |
||||||
Maximum pressure |
31.5MPa |
||||||
Pressure of work |
25MPa |
||||||
Working speed |
0—1000mm/min |
||||||
Fast speed back |
1500—2000mm/min |
||||||
Cylinder bore |
125mm*2 |
180mm*2 |
300mm*2 |
320mm*2 |
360mm*2 |
280mm*4 |
320*4 |
Oil cylinder stroke |
3000mm |
4000mm |
5000mm |
5000mm |
6000mm |
8000mm |
10000mm |
Oil cylinder thrust |
30T*2 |
30T*2 |
175T*2 |
200T*2 |
250T*2 |
150T*4 |
200T*4 |
The motor power |
18.5kw |
22.5kw |
37.5kw |
48kw |
56kw |
68kw |
80kw |
If needed power supply |
160kwa |
250kwa |
400kwa |
500kwa |
600kwa |
800kwa |
1000kwa |
Mechanical video
Equipment details
Hydraulic elbow machine is the main pipe fitting equipment for pushing elbow, with high production efficiency.
Core rod hydraulic bend machine operation procedures: hydraulic system work to keep closure pressure, the key is clamping cylinder lock up and down mold, at the same time push system with horizontal thrust pressure cylinder workpiece, push system start to the end of this period of time are clamping cylinder clamping phase, to ensure that the system cannot be made mould, push system work finished, open mould clamping cylinder, double core cylinder body up to 90 ° at mold core and artifacts, stripper cylinder body remove artifacts from the mold core.
The flow of hydraulic elbow machine is: tube blank saw cutting, multi - piece installation, medium frequency heating continuous push production, push semi-finished hydraulic press integral, car cutting processing elbow groove.This method has high production efficiency, small polishing workload, general labor intensity of workers, less cutting loss, small elbow processing allowance, low production cost, general product quality, simple cutting shape, but to heat and correct.