Speed: 80 RPM 100 RPM 125 RPM 160 RPM 200 RPM

Motor power: 15KW 1450 RPM

Designed as an improved XDP double-head automatic beveling machine, the power is 15 kW motor.Workbench for rotary worktable, put two lower die workbench, lock cylinder on the slide seat put an upper die, then put to the groove of the elbow in one of the lower die, began after processing to a speed adjusted the groove, double groove machine have to fast forward, after the electricity to processing into work automatically into the groove

Double head beveling machine

Aiming at the problem that the end of large diameter welded steel pipe needs to be machined, a end face beveling machine is designed, and its structure and working principle are introduced.

This machine tool is suitable for power station, petroleum, chemical, shipbuilding and other industries of pipe fitting manufacturing, pipeline installation units use;It is the key equipment for pipe fitting making and pipe end groove processing before welding in pipeline construction.

Automatic groove machining is a necessary procedure before welding of thick-wall petroleum pipe fittings and an important guarantee for welding quality of pipe fittings.Automatic bevel machine is the equipment for bevel processing of pipe fittings. At present, most of the equipment in China is portable, which is suitable for later modification of pipe fittings.

Aiming at the problem that the end of large diameter welded steel pipe needs to be machined, a end face beveling machine is designed, and its structure and working principle are introduced.

This machine tool is suitable for power station, petroleum, chemical, shipbuilding and other industries of pipe fitting manufacturing, pipeline installation units use;It is the key equipment for pipe fitting making and pipe end groove processing before welding in pipeline construction.

Automatic groove machining is a necessary procedure before welding of thick-wall petroleum pipe fittings and an important guarantee for welding quality of pipe fittings.Automatic bevel machine is the equipment for bevel processing of pipe fittings. At present, most of the equipment in China is portable, which is suitable for later modification of pipe fittings.

Speed: 80 RPM 100 RPM 125 RPM 160 RPM 200 RPM

Motor power: 15KW 1450 RPM

Designed as an improved XDP double-head automatic beveling machine, the power is 15 kW motor.Workbench for rotary worktable, put two lower die workbench, lock cylinder on the slide seat put an upper die, then put to the groove of the elbow in one of the lower die, began after processing to a speed adjusted the groove, double groove machine have to fast forward, after the electricity to processing into work automatically into the groove, groove processing after the automatic return,Automatically stop when it is in place (place an elbow in the other die while machining the groove).After the upper die is opened, the rotating table has to rotate 180° on the mold and start to slope another elbow. At this time, take down the slope good elbow and put another elbow, so that the flow back and forth.Groove speed is 1.5 times faster than without rotating table.The track adopts Taiwan imported linear track, with close, reduce vibration, slope out of the elbow without ripple, the beveling machine is equipped with a group of floating knives, but also can put six tool car compound beveling and inner beveling.

Can also be designed according to the need to make.

Cangzhou Aoguang Machinery Equipment Co., Ltd. not only produces groove machine, but also produces elbow machine, pipe bender, tee machine, pipe expanding machine, press and other mechanical equipment as well as supporting molds.