Hydraulic two-step tube expanding machine

The hydraulic two-step tube expanding machine is a dual-cylinder parallel equal-speed hydraulic pusher, and the valve platform of the pump station adopts the integrated form.The pump station is composed of multi-stage pumps: the first planting of the fourth specification of equipment working pumps for 2, the fifth to the eighth specification of equipment working pumps for 1.Set up a no-load fast forward fast back pump.The equipment of tube expanding machine is divided into two ways: primary propulsion and secondary propulsion.

If power supply is installed in the front of the equipment, if induction coil is placed on the adjusting frame, the core of the reamer mould and tube heating, and then start the tube machine, the tube can be expanded.The electrical control part of the pipe making machine is installed in the main control cabinet, and the trip switch is installed at both ends of the equipment.

Installation and debugging of hydraulic tube expanding machine: the hydraulic tube expanding machine is installed according to the foundation diagram stopped by the manufacturer. The overall equipment installation should be measured with a level to find a good level. After debugging the level and the center, the whole equipment should be fixed well.Before the delivery of hydraulic tube expanding machine, the pump station, hydraulic tube making machine and intermediate frequency power supply have all been adjusted. After the equipment arrives at the buyer, the equipment manufacturer shall send someone to guide the installation and debugging.