Reducing tee machine

The three-way machine is an important equipment for hydraulic machine manufacturers to produce three-way machine. Its hydraulic power structure is installed above the fuselage, which is composed of pump, motor, cartridge valve integrated block, oil tank, etc.

The forming principle of reducing tee machine: first put the billet into the lower die cavity, press the plunger pushing head into both ends of the pipe fitting under the action of the hydraulic cylinder, so that the pipe fitting cavity is sealed, and then the liquid medium is injected into the pipe fitting cavity through the liquid channel in the pushing head;At this point, the upper die moves down and forms a closed cavity together with the lower die. Finally, the liquid pressure controlled by the high pressure pump and valve increases continuously, the push head pushes the pipe fitting inward, the pipe wall deforms and gradually adheres to the inner wall of the mold, and the tee is formed.Reducing tee machine is mainly used in air conditioning refrigeration, hardware products, pure water direct drinking and other industries.Tee reducer suitable for carbon steel, stainless steel, even part of alloy steel.Commonly used hydraulic press, the process is to use to tee equal diameter tube billet inside the injection liquid, by reducing tee machine of the synchronization of the motion of two horizontal side urn to squeeze tube billet, billet after squeezed smaller volume, smaller volume of liquid with the tube billet inside the tube billet and pressure, when pressure tee branch pipe bulge out to the side of metal materials in liquid pressure in the cylinder and the pipe under the dual role of flow along the mold cavity and the branch pipe.Tee can be divided into carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy and so on.

Inclined tee molding machine

The work principle of inclined tee forming machine: use common hydraulic press, with the three links within the tube billet diameter equal injection liquid, through the two horizontal side of the hydraulic cylinder synchronization of the motion of tube billet, billet after squeezed smaller volume, smaller volume of liquid with the tube billet inside the tube billet and pressure, when pressure tee branch pipe bulge out to the side of metal materials in liquid pressure in the cylinder and the pipe under the dual role of flow along the mold cavity and the branch pipe.The three-way machine itself is a non-standard product, so there is no specific specification and model, we can directly customize according to customer requirements.

The hydraulic system of the inclined three-way molding machine is equipped with hydraulic oil filter, the oil tank adopts a closed structure, and the front opening hole window is equipped with anti-blocking.Tee machine is used in a wide range of fields, mainly in pipe connectors.The straight pipe is placed between the upper and lower molds, and the data of the control machine is adjusted and then extruded into a tee, which can be hydraulic molding. Cold extrusion technology is an advanced technology in tee manufacturing.

202-203.