Stainless steel equal diameter tee machine_Cangzhou City Mechanical Equipment Co. Ltd

Product Center

TEE MACHINE

Current position: HOME> Mechanical equipment>

Stainless steel equal diameter tee machine

Mechanical parameters

Tee machine

Processing range	1/2”—4”	1”—6”	2”—8”	3”—10”	4”—12”	5”—16”	8”—20”
Tee thickness	Sch40
Max.pressure	31.5MPa
Working pressure	25 MPa
Working speed	0—1000mm/min
Return speed	1500—2000mm/min
Side cylinder diameter	360mm*2	450mm*2	550mm*2	650mm*2	750mm*2	850mm*2	950mm*2
Side cylinder stroke	300mm	350mm	400mm	450mm	500mm	550mm	600mm
Side cylinder tonnage	250T*2	400T*2	600T*2	850T*2	1100T*2	1400T*2	1600T*2
Master cylinder diameter	400mm	500mm	600mm	700mm	800mm	900mm	1000mm
Master cylinder stroke	350mm	400mm	500mm	600mm	700mm	800mm	900mm
Master cylinder tonnage	315T	500T*2	700T	1000T	1200T	1600T	2000T
The motor power	50kw	55kw	65kw	75kw	100kw	120kw	170kw

Mechanical video

Equipment details

Stainless steel isometric tee mechine process includes the following steps:

A. Preheat the mold before use, the preheat temperature is 700-750 ℃, not more than 750℃, using gas, blowtorch, electrical or induction heating.

B. Excessive temperature will lead to sticky mold of liquid aluminum metal and slow cooling of casting, resulting in large grain size. Therefore, when the temperature of die casting mold is 750℃ or above, the die casting mold shall be cooled by compressed air, water or chemical medium.

C. Fill and hold pressure, set the filling time to 0.01s-0.1s. Since the liquid aluminum metal enters into the mold cavity and fills the mold cavity, the filling time can be flexibly set by the sectional area of the inner gate or the width and thickness of the inner gate as well as the volume size and complexity of the aluminum tee casting.

Related equipment