Chinese | English
Medium frequency induction heating pipe bending machine
Mechanical parameters
Processing range |
1”—8” |
3”—16” |
8”—24” |
16”—30” |
20”—36” |
24”—40” |
30”—48” |
32”—56” |
36”--64” |
Pipe thickness |
Sch40 |
||||||||
Max.pressure |
31.5MPa |
Chain-Drive Pipe Bending Machine |
|||||||
Working pressure |
25 MPa |
||||||||
Working speed |
0—1000mm/min |
0—1500mm/min |
|||||||
Return speed |
1500—2000mm/min |
2000—3000mm/min |
|||||||
Cylinder Diameter |
125mm*2 |
140mm*2 |
180mm*2 |
200mm*2 |
250mm*2 |
Compared with hydraulic pipe bender.the chain-drive pipe bending machine has the following
features: |
|||
Cylinder stroke |
3000mm |
4000mm |
5000mm |
8000mm |
8000mm |
||||
Cylinder thrust |
30T*2 |
38T*2 |
63T*2 |
78T*2 |
120T*2 |
||||
Motor power |
13kw |
18.5kw |
24kw |
28kw |
32kw |
||||
Transformer required for quenching |
500kwa |
1000kwa |
1000kwa |
1500kwa |
2000kwa |
2500kwa |
3000kwa |
3500kwa |
4000kwa |
IF power supply required |
160kwa |
250kwa |
300kwa |
500kwa |
600kwa |
600kw |
800kwa |
800kwa |
1000kwa |
Mechanical video
Equipment details
Medium frequency induction heating pipe bending machine is for petrochemical, electric power, urban construction project construction, bend the important equipment, its working principle is the use of intermediate frequency power supply for steel pipe (including low alloy steel, stainless steel tube, etc.) for heating, will be at a constant speed steel pipe at the same time, make the heating part of the steel pipe to walk along a predetermined path to form a certain curvature radius and bend Angle.
The characteristics of medium frequency induction heating pipe bending machine:
Bend a pipe with small deformation, wall thickness difference is small, no stress.Bending radius 0-1800 to adjust the operation is simple.
The working process of the medium frequency induction heating pipe bending machine:
Medium frequency induction heating pipe bending machine, its working principle is the use of intermediate frequency power supply heating of steel tube will be at a constant speed steel pipe at the same time, make the heating part of the steel pipe to walk along a predetermined path to form a certain curvature radius and bend Angle.Steel tube in place first, via the radial rotary device of screw gearing adjust good bending radius, by using medium frequency induction heating coil steel pipe bend after heated to a certain temperature, powered by hydraulic bending, by car pole pushed forward, the adjustment good at heat deformation and bending radius bending, deformation of steel pipe after the water spray cooling, so as to achieve the desired bending pipe.
Medium frequency induction heating pipe bending machine is for petrochemical, electric power, urban construction project construction, bend the important equipment, its working principle is the use of intermediate frequency power supply for steel pipe (including low alloy steel, stainless steel tube, etc.) for heating, will be at a constant speed steel pipe at the same time, make the heating part of the steel pipe to walk along a predetermined path to form a certain curvature radius and bend Angle.
The characteristics of medium frequency pipe bending machine:
Bend a pipe with small deformation, wall thickness difference is small, no stress.Bending radius 0-1800 to adjust the operation is simple.