Chinese | English
Mandrel elbow machine
Mechanical parameters
Project |
scope of elbow (inches) |
clamping force (KN) |
main force (KN) |
work pressure (MPa) |
motor power (KW) |
weight (T) |
BH-100T |
1/2 " ~3"28 |
1000 |
630 |
25 |
11 |
7 |
BH -160T |
1 "~4 "28 |
1600 |
1000 |
25 |
14 |
11 |
BH-300T |
2 "~6 " |
3000 |
1500 |
25 |
18.5 |
15 |
BH -400T |
4 "~8 " |
4000 |
2000 |
25 |
22 |
21 |
BH -500T |
5 "~10 " |
5000 |
2500 |
25 |
30 |
32 |
BH -800T |
6 "~12 " |
8000 |
4000 |
25 |
44 |
41 |
BH -1000T |
12 "~16 " |
10000 |
5000 |
25 |
50 |
57 |
BH -1600T |
16 "~20 " |
16000 |
8000 |
25 |
65 |
90 |
BH-2300T |
16“—24” |
23000 |
12000 |
25 |
80 |
120 |
Mechanical video
Equipment details
Mandrel type elbow machine
The cold push elbow machine comprises a frame, a work table, a side work table, a hydraulic press, a fuel tank, an electrical box and a control panel, and also comprises a forming mold, a mold lifting device and a stripping device.The frame is an integral frame structure.The oil press comprises a vertical oil press arranged vertically between the column and a horizontal oil press arranged horizontally between the middle section of the column.The motor of the hydraulic press is arranged on the upper part of the machine.In the upper part of the machine, a large flow low pressure pump group is installed to connect the vertical pressing oil cylinder to make the oil cylinder move quickly.The electrical box and control panel control the operation of the machine through the computer microcomputer.The utility model reduces the noise, and the arrangement of the components is more compact and reasonable.
Cold pushing elbow machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize cold pushing elbow machine according to customer requirements.We can make both the diameter of the elbow from 21mm-630mm and the wall thickness from 3mm-30mm.The main characteristic of cold push elbow machine is cheap cost.All pipe fitting enterprises need to purchase cold push elbow machine or elbow machine, which needs to be customized in advance. It takes 60 days for our company to produce this equipment, and elbow machine should be prepared for reservation in advance.
Cold push elbow machine
The wall thickness of the elbow pushed by the cold pushing elbow machine is relatively uniform. The wall thickness of the outer side of the elbow is consistent with that of the pipe billet. The thinning of the inner side wall is the largest, and the middle is gradually transitioned.
Elbow determines the shape of elbow when use the lateral metal than the inside of the metal to bear a greater impact, and the core rod extrusion bending method of cold bend machine manufacturing elbow its deformation characteristics conform to the terms of the use of the elbow, the mechanical device has simple structure, low cost, unloading, convenient and easy clamping, high production efficiency, product quality meet the production requirements.
This cold push elbow machine is used for the formation of elbow, the main power is hydraulic cylinder, there are two forms, ball type and mandrel type.
The main characteristics of the ball type cold push elbow machine is low cost, but low efficiency, need more manpower.
The main characteristics of the mandrel type cold retreat elbow machine are high cost, but also high efficiency, and save manpower.
Cold push elbow machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize according to customer requirements.
Elbow diameter from 21mm-630mm, wall thickness from 3mm-30mm we can do.
Cold push elbow machine is mainly used for stainless steel elbow forming, if the product you need is carbon steel or alloy steel elbow, it is recommended that you choose medium frequency heating elbow machine.
Ao Guang Machinery Equipment Co., Ltd. in addition to cold push elbow machine, but also the production of tee machine, pipe bender, medium frequency elbow machine.