Chinese | English
Pipe bender equipment
Mechanical parameters
Processing range |
1”—8” |
3”—16” |
8”—24” |
16”—30” |
20”—36” |
24”—40” |
30”—48” |
32”—56” |
36”--64” |
Pipe thickness |
Sch40 |
||||||||
Max.pressure |
31.5MPa |
Chain-Drive Pipe Bending Machine |
|||||||
Working pressure |
25 MPa |
||||||||
Working speed |
0—1000mm/min |
0—1500mm/min |
|||||||
Return speed |
1500—2000mm/min |
2000—3000mm/min |
|||||||
Cylinder Diameter |
125mm*2 |
140mm*2 |
180mm*2 |
200mm*2 |
250mm*2 |
Compared with hydraulic pipe bender.the chain-drive pipe bending machine has the following
features: |
|||
Cylinder stroke |
3000mm |
4000mm |
5000mm |
8000mm |
8000mm |
||||
Cylinder thrust |
30T*2 |
38T*2 |
63T*2 |
78T*2 |
120T*2 |
||||
Motor power |
13kw |
18.5kw |
24kw |
28kw |
32kw |
||||
Transformer required for quenching |
500kwa |
1000kwa |
1000kwa |
1500kwa |
2000kwa |
2500kwa |
3000kwa |
3500kwa |
4000kwa |
IF power supply required |
160kwa |
250kwa |
300kwa |
500kwa |
600kwa |
600kw |
800kwa |
800kwa |
1000kwa |
Mechanical video
Equipment details
Pipe bender equipment
Pipe bender is acceptance of intermediate frequency electric heating, to be held under the condition of the local heating of the workpiece bending, compared with as usually chain pipe bending machine, not only need not set of commonly used chain, and only account for the same specifications of the intermediate frequency machine volume pipe bending machine, intermediate frequency of bending tube bender, the process is the comparison of the existing steel pipe technology economy applicable convenient operation, high efficiency.
Pipe bending machine in the production of bend pipe is mainly used in electric power, oil, chemical, oil, nuclear industry and other projects for pipeline processing and manufacturing, medium frequency pipe bender bending can be all kinds of curved pipe, bend steel pipe is respectively according to the requirements of the applicable in the point of view, the bending radius is less than 3 D (D) is the pipe diameter, after many years of manufacturing experience, our company manufacture pipe bender exported to different places, such as Russia, India, turkmenistan, Malaysia, Egypt, etc.
Working principle of pipe bender is the use of medium frequency heating power supply, will be at a constant speed steel pipe at the same time, make the heating part of the steel pipe to walk along a predetermined path curvature radius and bend Angle, install the steel tube in place now, through the rocker arm can turn device of screw gearing adjust good bending radius, by using medium frequency induction heating coil steel pipe bend after heated to a certain temperature, powered by hydraulic bending, by car pole pushed forward, the tuned at heat deformation and bending radius bending, deformation of steel pipe after the water spray cooling, so as to achieve the desired bending tube.
Power system of pipe bender: the power system is composed of motors and valves of different diameters of hydraulic pumps. The pipe bender is divided into two working states: fast advance and backward, respectively driven by alternating current motor and frequency conversion motor.Variable frequency motor and alternating current motor respectively: variable frequency motor is to provide the power of the elbow machine.AC motor is brake and electromagnetic clutch and AC motor linkage control.
The company mainly produces all kinds of different models and pipe bender, elbow machine, beveling machine, pipe expanding machine, press, three-way machine, rolling machine and other above pipe fittings and equipment molds, welcome new and old users consultation!Pipe bender mainly adopts the electronic control system using numerical control panel control, hydraulic drive, with a variety of different bending Angle customization.
Pipe bender can set different production speed and processing stroke according to customer's production material change.
The pipe bender is equipped with Chinese subtitle display and man-machine dialogue operation. It can choose two functions: manual, semi-automatic, operation mode, mobile foot switch and tight stop.
The automatic hydraulic system in the production process of the pipe bender can reduce the service life of the mould of the pipe bender and ensure the quality of the pipe bending.
The pipe bender is equipped with large capacity cooling system to effectively control the working temperature.
The pipe bender can choose to decompose the action, observe the interference electricity, modify the action, improve the efficiency.
Pipe bender mainly includes: frame, main cylinder support plate (including main cylinder), movable push plate, elbow clamp wheel platform, elbow rocker arm, rocker arm rotating shaft, elbow combination chuck, intermediate frequency transformer bracket, intermediate frequency power supply, intermediate frequency transformer, electrical control system and so on.
Pipe bender is mainly divided into two kinds, hydraulic pipe bender and chain pipe bender.When ordering the pipe bender of our company, our company will complete the pipe bender ordered by the customer within 60 days.113-114.