Chinese | English
Medium frequency pipe bender and bending machine
Mechanical parameters
Processing range |
1”—8” |
3”—16” |
8”—24” |
16”—30” |
20”—36” |
24”—40” |
30”—48” |
32”—56” |
36”--64” |
Pipe thickness |
Sch40 |
||||||||
Max.pressure |
31.5MPa |
Chain-Drive Pipe Bending Machine |
|||||||
Working pressure |
25 MPa |
||||||||
Working speed |
0—1000mm/min |
0—1500mm/min |
|||||||
Return speed |
1500—2000mm/min |
2000—3000mm/min |
|||||||
Cylinder Diameter |
125mm*2 |
140mm*2 |
180mm*2 |
200mm*2 |
250mm*2 |
Compared with hydraulic pipe bender.the chain-drive pipe bending machine has the following
features: |
|||
Cylinder stroke |
3000mm |
4000mm |
5000mm |
8000mm |
8000mm |
||||
Cylinder thrust |
30T*2 |
38T*2 |
63T*2 |
78T*2 |
120T*2 |
||||
Motor power |
13kw |
18.5kw |
24kw |
28kw |
32kw |
||||
Transformer required for quenching |
500kwa |
1000kwa |
1000kwa |
1500kwa |
2000kwa |
2500kwa |
3000kwa |
3500kwa |
4000kwa |
IF power supply required |
160kwa |
250kwa |
300kwa |
500kwa |
600kwa |
600kw |
800kwa |
800kwa |
1000kwa |
Mechanical video
Equipment details
Medium frequency pipe bender and bending machine
1) The process can avoid the phenomenon of uneven wall thickness caused by tensile thinning of the convex edge of the pipe wall and compression thickening of the concave edge of the pipe wall during the forming of the traditional bending process.
2) The small radius (R≈D) and thin wall (t/D≈0.015) 180 elbow with uniform wall thickness can be produced by using this process, which can not be achieved by other bending processes.
3) If the design of various process parameters is reasonable, the process can ensure that the thickness of the pipe wall in each position is always unchanged during the forming process of the elbow, that is, it is always equal to the thickness of the straight pipe blank before deformation.
4) The technology can be used to push the same horn mandrel at one time to produce the same caliber of 45°, 90°, 180° and other bending angles of the bend pipe, high production efficiency.
Hydraulic pipe bender pipe bender manufacturers
Pipe bender mainly includes: frame, main cylinder support plate (including main cylinder), movable push plate, elbow clamp wheel platform, elbow rocker arm, rocker arm rotating shaft, elbow combination chuck, intermediate frequency transformer bracket, intermediate frequency power supply, intermediate frequency transformer, electrical control system and so on.
This medium frequency pipe bender is used for the formation of pipe bender, the main power is hydraulic cylinder or chain transmission, heating method is medium frequency heating
The medium frequency pipe bender itself is a non-standard product, so there are no specific specifications and models. We can directly customize according to customer requirements
We can make both the diameter of the elbow from 21mm to 1620mm and the wall thickness from 3mm to 100mm
Medium frequency pipe bender can be used for carbon steel, alloy steel, stainless steel steel pipe of any material
Medium frequency pipe bender can be divided into two kinds: hydraulic medium frequency pipe bender and chain medium frequency pipe bender
General hydraulic medium frequency pipe bender for 21mm-920mm, 1020mm-1620mm general selection of chain medium frequency pipe bender
Of course, and can be selected according to the specific requirements of customers
Characteristics of hydraulic medium frequency pipe bender and chain medium frequency pipe bender
204-205.