Hydraulic pipe bender manufacturers

Hydraulic pipe bender is a new type of pipe bending tool with pipe bending function and lifting function.

Before operation of pipe bender

1. The machine tool must be well grounded, and the wire shall not be less than 4mm2 copper flexible wire.Do not allow access to power supply voltage beyond the specified range, do not live plug and unplug plug-in, do not use megohmmeter test control loop, otherwise it may damage the device.

2, in the plug plug, can not pull the wire or cable, in order to prevent welding pull off.

3, proximity switch, encoder and other can not be hit with hard objects.

4, can not use sharp objects collision display unit.

5. The electrical box must be placed in the ventilated place, and it is forbidden to work in dust and corrosive gas.

6. It is not allowed to install or connect to the PC input and output terminals without permission.

7. The motor steering must be reconfirmed when the medium frequency pipe bender replaces the power supply of the machine tool.

8. The machine tool should be kept clean. In particular, there should be no foreign body in the sliding groove such as clamping block and slide block.

9. Add lubricating oil to the chain and other sliding parts regularly.

10. The power supply of the hydraulic pipe bender must be disconnected when cleaning and repairing.

Hot forming medium frequency pipe bender pipe fitting machinery

Thermal forming medium frequency pipe bender and its PLC technology control: by the hydraulic drive, programmable controller control of medium frequency heating hydraulic pipe bender.This paper introduces its working principle, hydraulic system and PLC control system, and describes the performance characteristics of the machine.The control system adopts programmable controller and man-machine interface, which improves the reliability and flexibility of the system, and enhances the anti-interference ability of the machine tool.

The structure of the medium frequency heating pipe bender is analyzed, and the main mechanical devices are selected and calculated. The hydraulic system is designed to replace the traditional mechanical transmission, and the control system of the medium frequency pipe bender based on PLC is designed.The control system includes Angle control, temperature control and motion process control.The upper computer uses a PC, the lower computer uses a programmable controller, using the communication function of the programmable controller, using Visual Basic to develop a simple and practical monitoring software, to achieve the purpose of real-time monitoring.In addition, the control system also adopts the touch screen, so that the man-machine interaction is more convenient.

The pipe bender fittings produced by our company have high mechanical production efficiency, low labor cost, good quality and beautiful appearance.Aocheng Machinery Equipment Co., Ltd. also produces elbow pushing machine, beveling machine, elbow machine and other pipe fittings equipment.

3013-3014.