Cold push machine cold push elbow machine_Cangzhou City Mechanical Equipment Co. Ltd

Product Center

COLD FORMING ELBOW MACHINE

Current position: HOME> Mechanical equipment>

Cold push machine cold push elbow machine

Mechanical parameters

101102

Model	Diameter Range	Clamping Force(KN)	Main Thrust (KN)	Working Pressure(MPa)	Motor Power (KW)	Weight (T)
BH-100T	1/2 " ~3"28	1000	630	25	11	7
BH -160T	1 "~4 "28	1600	1000	25	14	11
BH-300T	2 "~6 "	3000	1500	25	18.5	15
BH -400T	4 "~8 "	4000	2000	25	22	21
BH -500T	5 "~10 "	5000	2500	25	30	32
BH -800T	6 "~12 "	8000	4000	25	44	41
BH -1000T	12 "~16 "	10000	5000	25	50	57
BH -1600T	16 "~20 "	16000	8000	25	65	90
BH-2300T	16“—24”	23000	12000	25	80	120

Mechanical video

Equipment details

Cold push machine cold push elbow machine

Manufacture cold push elbow machine

The main purpose of cold push elbow machine: this cold push elbow machine is mainly used for the formation of elbow, the main power is hydraulic cylinder, there are two forms, ball type and mandrel type, ball type cold push elbow machine is mainly characterized by cheap cost, but low efficiency, need to spend more labor.Mandrel cold - push elbow machine is characterized by high cost, high efficiency and manpower saving.

Through the ball type cold push elbow machine mainly includes: fuselage (frame), die cylinder, side push cylinder and so on.

Forming principle of the cold-push elbow machine: the tube billet is formed in the tunnel die cavity which is locked by external force, and is pushed by the hydraulic ejector from the guide section into the set inner core forming cavity, and the mould is released by the stripper.

Ball type cold push elbow machine and mandrel type cold push elbow machine belong to non-standard products, there is no specific model, we can directly customize according to customer requirements.

The elbow diameter of the cold push machine can be made from 21mm-630mm, and the wall thickness from 3mm-30mm.

Ball bending machine and mandrel bending machine are mainly used for making stainless steel products. If the product you need is carbon steel or alloy steel bending machine, we recommend that you use medium frequency heating bending machine.

The main role of cold push elbow machine is to produce stainless steel elbow, cold push elbow machine in the production of stainless steel elbow we should how to install the optimal effect, in the production process the most convenient and use.In the installation of cold - push elbow machine need to pay attention to these points, you can better use.

During installation, pull out the clamping die of the cold push elbow machine, so that you can fix the centering spindle. After that, put the cold push elbow machine into the clamping die and insert the fixed mandrel into it.

Adjust the bending machine fixed to reduce, put the control panel in manual mode, press the button, until jia Mo arrived at the end.Then, the roumo is tightly closed with the wheel mold by adjustment, and the nut lock is finally fixed with the roumo.

Through the above points when installing the cold push elbow machine, the elbow machine at the installation place has the best production effect in the production process.

Cangzhou Aoguang mechanical Equipment Co., LTD not only produces ball bending machine, but also produces mandrel cold pushing bending machine, pipe bending machine, tee machine, pipe expanding machine, bevel machine and other mechanical equipment and supporting molds.

Related equipment