Chinese | English
Mandrel type elbow machine
Mechanical parameters
he cold push elbow machine comprises a frame, a work table, a side work table, a hydraulic press, a fuel tank, an electrical box and a control panel, and also comprises a forming mold, a mold lifting device and a stripping device.
Project |
scope of elbow (inches) |
clamping force (KN) |
main force (KN) |
work pressure (MPa) |
motor power (KW) |
weight (T) |
BH-100T |
1/2 " ~3"28 |
1000 |
630 |
25 |
11 |
7 |
BH -160T |
1 "~4 "28 |
1600 |
1000 |
25 |
14 |
11 |
BH-300T |
2 "~6 " |
3000 |
1500 |
25 |
18.5 |
15 |
BH -400T |
4 "~8 " |
4000 |
2000 |
25 |
22 |
21 |
BH -500T |
5 "~10 " |
5000 |
2500 |
25 |
30 |
32 |
BH -800T |
6 "~12 " |
8000 |
4000 |
25 |
44 |
41 |
BH -1000T |
12 "~16 " |
10000 |
5000 |
25 |
50 |
57 |
BH -1600T |
16 "~20 " |
16000 |
8000 |
25 |
65 |
90 |
BH-2300T |
16“—24” |
23000 |
12000 |
25 |
80 |
120 |
Mechanical video
Equipment details
The cold push elbow machine comprises a frame, a work table, a side work table, a hydraulic press, a fuel tank, an electrical box and a control panel, and also comprises a forming mold, a mold lifting device and a stripping device.The frame is an integral frame structure.The oil press comprises a vertical oil press arranged vertically between the column and a horizontal oil press arranged horizontally between the middle section of the column.The motor of the hydraulic press is arranged on the upper part of the machine.In the upper part of the machine, a large flow low pressure pump group is installed to connect the vertical pressing oil cylinder to make the oil cylinder move quickly.The electrical box and control panel control the operation of the machine through the computer microcomputer.The utility model reduces the noise, and the arrangement of the components is more compact and reasonable.
Cold pushing elbow machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize cold pushing elbow machine according to customer requirements.We can make both the diameter of the elbow from 21mm-630mm and the wall thickness from 3mm-30mm.The main characteristic of cold push elbow machine is cheap cost.All pipe fitting enterprises need to purchase cold push elbow machine or elbow machine, which needs to be customized in advance. It takes 60 days for our company to produce this equipment, and elbow machine should be prepared for reservation in advance.
Mandrel type elbow machine is mainly used for the forming of stainless steel elbow. If the product you need is carbon steel or alloy steel elbow, it is recommended that you choose medium frequency heating elbow machine. Mandrel type elbow machine is used for the formation of elbow.The main characteristics of mandrel type elbow machine are simple operation, low cost and high efficiency.Mandrel type elbow machine does not have specific specifications and models, we can be customized according to customers.Elbow diameter 21-630mm, wall thickness 3-30mm we can do.
111-112.