Full automatic double-head elbow beveling machine

Speed: 80 r/min. 100 r/min. 125 r/min. 160 r/min. 200 r/min

Motor power: 15KW 1450 RPM

The design is an improved XDP double-head automatic bevel machine with a power of 15 kw motor.Workbench for rotary worktable, put two lower die workbench, lock cylinder on the slide seat put an upper die, then put to the groove of the elbow in one of the lower die, began after processing to a speed adjusted the groove, double groove machine have to fast forward, after the electricity to processing into work automatically into the groove, groove processing after the automatic return, automatic stop when in place (in processing groove at the same time another mould also put an elbow).After the top die is opened, the rotating table is rotated by 180° to begin to slope another bend under the upper die press. At this time, the good bend is taken off and another bend is put in, and so on.Bevel speed is 1.5 times faster than without a swivel table.The track adopts the linear track imported from Taiwan, which is closely matched to reduce the vibration, and there is no ripple on the elbow. The beveling machine is equipped with a set of floating knives, and can also compound the bevel and inner bevel with six tool cars.

Can also be designed according to the needs of the production.