Chinese | English
Intermediate frequency elbow machine
Mechanical parameters
Processing rangel |
1”—6” |
3”—12” |
8”—24” |
16”—30” |
20”—36” |
30”—48” |
32”—56” |
MAX.wall thickness |
Sch40 |
||||||
MAX.pressure |
31.5MPa |
||||||
Working pressure |
25 MPa |
||||||
Working speed |
0—1000mm/min |
||||||
Return speeed |
1500—2000mm/min |
||||||
Cylinder diameter |
125mm*2 |
180mm*2 |
300mm*2 |
320mm*2 |
360mm*2 |
280mm*4 |
320*4 |
Cylinder Stroke |
3000mm |
4000mm |
5000mm |
5000mm |
6000mm |
8000mm |
10000mm |
Cylinder thrust |
30T*2 |
30T*2 |
175T*2 |
200T*2 |
250T*2 |
150T*4 |
200T*4 |
Motor power |
18.5kw |
22.5kw |
37.5kw |
48kw |
56kw |
68kw |
80kw |
IF Power supply needed |
160kwa |
250kwa |
400kwa |
500kwa |
600kwa |
800kwa |
1000kwa |
Mechanical video
Equipment details
The intermediate frequency elbow machine adopts hydraulic cylinder and intermediate-frequency heating. Elbow making machines using coal stove heating and natural gas heating are also available.
This intermediate frequency elbow machine is used for making carbon steel elbows and alloy steel elbows. The finished elbows are available with the diameter ranging from 21mm to 1620mm and the wall thickness from 3mm to 120mm.
Our intermediate frequency elbow machine consists of the following parts: base, master cylinder support plate (including master cylinder), mobile push plate, front support plate, semi-automatic feeding mechanism, IF coil adjustment bracket (including IF heating coil), IF power supply, and electrical control system.
Specifications of several common intermediate frequency elbow machines are listed in the following table. In addition to the models listed in the table, we can also produce elbow forming machines according to customer requirements.