Chinese | English

厂家logo
E-MAIL:15230713671@163.com           TEL:0086-17761570021
    HYDRAULIC PIPE BENDING MACHINE
    Current position: HOME> Mechanical equipment>

    Hot forming pipe bending machine

    Hot forming pipe bending machine

    Mechanical parameters

    Specifications of the pipe bending machine are listed in the table below. In addition to the models listed in the table, we can also offer customized pipe bending equipment.

    Processing range

    1”—8”

    3”—16”

    8”—24”

    16”—30”

    20”—36”

    24”—40”

    30”—48”

    32”—56”

    36”--64”

    Pipe thickness

    Sch40

    Max.pressure

    31.5MPa

    Chain-Drive Pipe Bending Machine

    Working pressure

    25 MPa

    Working speed

    0—1000mm/min

    0—1500mm/min

    Return speed

    1500—2000mm/min

    2000—3000mm/min

    Cylinder Diameter

    125mm*2

    140mm*2

    180mm*2

    200mm*2

    250mm*2

    Compared with hydraulic pipe bender.the chain-drive pipe bending machine has the following

    features:
    1.Stroke is arbitrary due to chain drive;
    2.Space-saving;
    3.Low-cost

    Cylinder stroke

    3000mm

    4000mm

    5000mm

    8000mm

    8000mm

    Cylinder thrust

    30T*2

    38T*2

    63T*2

    78T*2

    120T*2

    Motor power

    13kw

    18.5kw

    24kw

    28kw

    32kw

    Transformer required for quenching

    500kwa

    1000kwa

    1000kwa

    1500kwa

    2000kwa

    2500kwa

    3000kwa

    3500kwa

    4000kwa

    IF power supply required

    160kwa

    250kwa

    300kwa

    500kwa

    600kwa

    600kw

    800kwa

    800kwa

    1000kwa

     

    Mechanical video

    Equipment details

    The hot forming pipe bending machine is used for the bend, its main impetus is the hydraulic oil cylinder or chain transmission, heating mode is medium frequency heating
    Intermediate frequency are non-standard products, the pipe bending machine itself so there is no specific specifications, we can according to customers' special requirements directly
    We can all do Bend from 21 mm - 1620 mm in diameter, wall thickness from 3 mm - 100 mm .
    Intermediate frequency pipe bending machine can be used for carbon steel, alloy steel, stainless steel material of steel pipe.

    The hot forming pipe bending machine uses hydraulic cylinder or chain drive and medium frequency induction heating. It consists of 4 mechanisms which are power source mechanism, clamping and fixing mechanism, bending radius adjusting mechanism, and propelling mechanism.
    According to the drive source, there are two types of intermediate frequency heating pipe bending machine, i.e., IF heating hydraulic pipe bending machine and IF heating chain-drive pipe bending machine. The former is used to bend the pipes with the diameter of 21mm to 920mm while the latter is for pipes of 1020mm to 1620mm.
    The hot forming pipe bending machine can be used to bend the pipes made of carbon steel, alloy steel, or stainless steel. The pipes with the diameter of 21mm to 1620mm and the wall thickness of 3mm to 100mm can also be processed.

    Hot forming pipe bending machine and the characteristics of chain intermediate frequency pipe bending machine, please see the table below
    Equipment mainly include: frame, main oil cylinder plate (including the main oil cylinder), active pushing plate, pipe clamp, bend the rocker, rocker arm shaft, wheel platform bend combination, intermediate frequency transformer of the clamp bracket, intermediate frequency power supply, frequency transformer, electric control system, etc.