Chinese | English
Aocheng equipment elbow machine
Mechanical parameters
Hot forming elbow machine
Processing rangel |
1”—6” |
3”—12” |
8”—24” |
16”—30” |
20”—36” |
30”—48” |
32”—56” |
MAX.wall thickness |
Sch40 |
||||||
MAX.pressure |
31.5MPa |
||||||
Working pressure |
25 MPa |
||||||
Working speed |
0—1000mm/min |
||||||
Return speeed |
1500—2000mm/min |
||||||
Cylinder diameter |
125mm*2 |
180mm*2 |
300mm*2 |
320mm*2 |
360mm*2 |
280mm*4 |
320*4 |
Cylinder Stroke |
3000mm |
4000mm |
5000mm |
5000mm |
6000mm |
8000mm |
10000mm |
Cylinder thrust |
30T*2 |
30T*2 |
175T*2 |
200T*2 |
250T*2 |
150T*4 |
200T*4 |
Motor power |
18.5kw |
22.5kw |
37.5kw |
48kw |
56kw |
68kw |
80kw |
IF Power supply needed |
160kwa |
250kwa |
400kwa |
500kwa |
600kwa |
800kwa |
1000kwa |
Mechanical video
Equipment details
Elbow machine is an important and indispensable pipe fitting equipment in the hydraulic market. Aocheng mechanical equipment co., LTD. In the past few years, has been committed to the development of elbow machine, cold push elbow machine, PLC system control of the intermediate frequency elbow machine, hot push elbow machine. One of the cold push pipe bending machine is the cold extrusion of steel pipe, bending bending bending bending bending forming. The specific working process of the cold push elbow machine: it USES a special elbow forming machine to put the tube blank into the external mold. After the upper and lower parts are molded, the tube blank moves along the clearance reserved by the internal mold and the external mold under the push of the push rod to complete the forming process.