Chinese | English
Chain-Drive Medium Frequency Induction Heating Pipe Bending
Mechanical parameters
Processing range |
1”—8” |
3”—16” |
8”—24” |
16”—30” |
20”—36” |
24”—40” |
30”—48” |
32”—56” |
36”--64” |
Pipe thickness |
Sch40 |
||||||||
Max.pressure |
31.5MPa |
Chain-Drive Pipe Bending Machine |
|||||||
Working pressure |
25 MPa |
||||||||
Working speed |
0—1000mm/min |
0—1500mm/min |
|||||||
Return speed |
1500—2000mm/min |
2000—3000mm/min |
|||||||
Cylinder Diameter |
125mm*2 |
140mm*2 |
180mm*2 |
200mm*2 |
250mm*2 |
Compared with hydraulic pipe bender.the chain-drive pipe bending machine has the following
features: |
|||
Cylinder stroke |
3000mm |
4000mm |
5000mm |
8000mm |
8000mm |
||||
Cylinder thrust |
30T*2 |
38T*2 |
63T*2 |
78T*2 |
120T*2 |
||||
Motor power |
13kw |
18.5kw |
24kw |
28kw |
32kw |
||||
Transformer required for quenching |
500kwa |
1000kwa |
1000kwa |
1500kwa |
2000kwa |
2500kwa |
3000kwa |
3500kwa |
4000kwa |
IF power supply required |
160kwa |
250kwa |
300kwa |
500kwa |
600kwa |
600kw |
800kwa |
800kwa |
1000kwa |
Mechanical video
Equipment details
The chain drive pipe bending machine is used for the bend, its main impetus is the hydraulic oil cylinder or chain transmission, heating mode is medium frequency heating
Intermediate frequency are non-standard products, the pipe bending machine itself so there is no specific specifications, we can according to customers' special requirements directly
We can all do Bend from 21 mm - 1620 mm in diameter, wall thickness from 3 mm - 100 mm .
Intermediate frequency pipe bending machine can be used for carbon steel, alloy steel, stainless steel material of steel pipe.
The hot forming pipe bending machine uses hydraulic cylinder or chain drive and medium frequency induction heating. It consists of 4 mechanisms which are power source mechanism, clamping and fixing mechanism, bending radius adjusting mechanism, and propelling mechanism.
According to the drive source, there are two types of intermediate frequency heating pipe bending machine, i.e., IF heating hydraulic pipe bending machine and IF heating chain-drive pipe bending machine. The former is used to bend the pipes with the diameter of 21mm to 920mm while the latter is for pipes of 1020mm to 1620mm.
The chain drive pipe bending machine can be used to bend the pipes made of carbon steel, alloy steel, or stainless steel. The pipes with the diameter of 21mm to 1620mm and the wall thickness of 3mm to 100mm can also be processed.