Chinese | English
Three - way machine hydraulic three - way machine factory
Mechanical parameters
Processing range |
1/2”—4” |
1”—6” |
2”—8” |
3”—10” |
4”—12” |
5”—16” |
8”—20” |
Tee thickness |
Sch40 |
||||||
Max.pressure |
31.5MPa |
||||||
Working pressure |
25 MPa |
||||||
Working speed |
0—1000mm/min |
||||||
Return speed |
1500—2000mm/min |
||||||
Side cylinder diameter |
360mm*2 |
450mm*2 |
550mm*2 |
650mm*2 |
750mm*2 |
850mm*2 |
950mm*2 |
Side cylinder stroke |
300mm |
350mm |
400mm |
450mm |
500mm |
550mm |
600mm |
Side cylinder tonnage |
250T*2 |
400T*2 |
600T*2 |
850T*2 |
1100T*2 |
1400T*2 |
1600T*2 |
Master cylinder diameter |
400mm |
500mm |
600mm |
700mm |
800mm |
900mm |
1000mm |
Master cylinder stroke |
350mm |
400mm |
500mm |
600mm |
700mm |
800mm |
900mm |
Master cylinder tonnage |
315T |
500T*2 |
700T |
1000T |
1200T |
1600T |
2000T |
The motor power |
50kw |
55kw |
65kw |
75kw |
100kw |
120kw |
170kw |
Mechanical video
Equipment details
Three - way machine hydraulic three - way machine factory
Tee machine mainly produces carbon steel, alloy steel, stainless steel and other materials of the tee.
Tee machine in the production of tee when first will bloom in the mould cavity, under the action of the hydraulic cylinder to press the plunger have a haircut into on both ends of pipe fittings, pipe cavity is sealed, and then through the fluid channel in the have a haircut will inject pipe cavity liquid medium, at this point, the upper die moves down, form a sealed cavity together with the lower die, the high-pressure pump and valve control liquid pressure increasing, have a haircut inward push pipe fittings, pipe wall deformation and gradually with the mold wall tiejin, such tee forming.
This three-way machine is used for three-way molding, the main power is hydraulic cylinder.
The three-way machine itself is a non-standard product, so there is no specific specifications and models.We can make custom according to customer's requirement.Tee molding machine factory
Tee machine is used for carbon steel, stainless steel pipe tee commonly used machine, the machine adopts liquid drawing bulging forming principle, the equipment can realize both inching and semi-automatic operation mode, adopts hydraulic synchronization method of left right side urn, stroke by stroke switch is adjusted, and the main cylinder pressure relief characteristics, safe and reliable, high production efficiency.
The three-way machine itself is a non-standard product, so there is no specific specification and model, we can directly customize according to customer requirements
We can do both the diameter of the tee from 21mm to 630mm and the wall thickness from 3mm to 20mm
105-106.