三通机

Standard aluminum tee machine

Standard aluminum three-way machine composition: 1, column fixed hole;2. Beam fixing hole;3, lifting ring fixing hole;4. Hinge fixing hole;5. Door fixing hole;6. Process tank;7. Fixed hole of inner column;8, support seat;9. Column;10. Cross beam.

The advantages and characteristics of standard aluminum three-way machine:The standard adopts pure aluminum casting, aluminum tee is very strong, inside door and outside door can borrow the standard aluminum tee ACTS as sheet, along with the actual situation to increase or reduce the amount of use, has realized the standardization design and production, cancelled hinges cost at the same time, reduces the cost, only need to make when using three standard column, with the standard aluminum tee, can meet the needs of the majority of the cabinet put oneself in another's position, and to achieve standardization design and production, its structure is flexible adjustable, can increase the inner cylinder, can increase the bearing columns, and can install according to the internal demand, opening, column, and ark, can use the standard aluminum tank tee at the top of the process, from the external fixation,Is both strong and the province, outside the standard aluminum tee and column with bolt connection, be clear at a glance, convenient assembly at the scene, can realize the bulk packaging transportation, using the standard aluminum tee, can be realized without welding, cabinet put oneself in another's position can reach and welding ark also stronger than, eye bolt in the center of the standard aluminum tee fortified position, can ensure the cabinet put oneself in another's position in the process of lifting and peace.

The company is commonly used three - way machine manufacturers and hydraulic three - way machine equipment manufacturers, mainly produce and manufacture all kinds of machinery and equipment.

The three-way machine is used for the formation of the three-way, the main power is the hydraulic cylinder.The three-way machine itself is a non-standard product, so there is no specific specification and model, we can directly customize according to customer requirements.We can do both the diameter of the tee from 21mm to 630mm and the wall thickness from 3mm to 20mm.

Tee machine is mainly used for the common hydraulic press which is made of carbon steel and stainless steel pipe material, and is suitable for the forming of the joint of three pipe fittings of various specifications.

107-108.