Chinese | English
21-630 steel tee machine
Mechanical parameters
Tee machine
Processing range |
1/2”—4” |
1”—6” |
2”—8” |
3”—10” |
4”—12” |
5”—16” |
8”—20” |
Tee thickness |
Sch40 |
||||||
Max.pressure |
31.5MPa |
||||||
Working pressure |
25 MPa |
||||||
Working speed |
0—1000mm/min |
||||||
Return speed |
1500—2000mm/min |
||||||
Side cylinder diameter |
360mm*2 |
450mm*2 |
550mm*2 |
650mm*2 |
750mm*2 |
850mm*2 |
950mm*2 |
Side cylinder stroke |
300mm |
350mm |
400mm |
450mm |
500mm |
550mm |
600mm |
Side cylinder tonnage |
250T*2 |
400T*2 |
600T*2 |
850T*2 |
1100T*2 |
1400T*2 |
1600T*2 |
Master cylinder diameter |
400mm |
500mm |
600mm |
700mm |
800mm |
900mm |
1000mm |
Master cylinder stroke |
350mm |
400mm |
500mm |
600mm |
700mm |
800mm |
900mm |
Master cylinder tonnage |
315T |
500T*2 |
700T |
1000T |
1200T |
1600T |
2000T |
The motor power |
50kw |
55kw |
65kw |
75kw |
100kw |
120kw |
170kw |
Mechanical video
Equipment details
The hydraulic system of the tee machine pipe fitting equipment produced by aocheng mechanical equipment is equipped with hydraulic oil filtration, and the oil tank adopts a closed structure. The front opening hole window is equipped with anti-blocking. Tee machine is widely used in the field of pipe fittings. The working principle of the tee machine is to use liquid materials such as tap water, put the straight pipe between the upper and lower molds, do a good job of controlling the data of the machine and extrude it into a tee, then the hydraulic molding, cold extrusion technology is the leading technology of the tee manufacturing. At the same time, the production process of cold push elbow machine is similar. This production process has high production efficiency, and the tee pipe fittings produced are good-looking in appearance, and the quality is also praised and bought back by customers. Its applicable molding materials include low carbon steel, low alloy steel, stainless steel, etc