Cold drawing tee machine pipe fitting manufacturer_Cangzhou City Mechanical Equipment Co. Ltd

Product Center

TEE MACHINE

Current position: HOME> Mechanical equipment>

Cold drawing tee machine pipe fitting manufacturer

Mechanical parameters

Tee machine

Processing range	1/2”—4”	1”—6”	2”—8”	3”—10”	4”—12”	5”—16”	8”—20”
Tee thickness	Sch40
Max.pressure	31.5MPa
Working pressure	25 MPa
Working speed	0—1000mm/min
Return speed	1500—2000mm/min
Side cylinder diameter	360mm*2	450mm*2	550mm*2	650mm*2	750mm*2	850mm*2	950mm*2
Side cylinder stroke	300mm	350mm	400mm	450mm	500mm	550mm	600mm
Side cylinder tonnage	250T*2	400T*2	600T*2	850T*2	1100T*2	1400T*2	1600T*2
Master cylinder diameter	400mm	500mm	600mm	700mm	800mm	900mm	1000mm
Master cylinder stroke	350mm	400mm	500mm	600mm	700mm	800mm	900mm
Master cylinder tonnage	315T	500T*2	700T	1000T	1200T	1600T	2000T
The motor power	50kw	55kw	65kw	75kw	100kw	120kw	170kw

Mechanical video

Equipment details

Production process of cold-drawing tee machine: cold-drawing tee pipe device is a special equipment for cold-drawing tee pipe fitting, whose devices include metal bar, pressure jack, commutator, bracket, etc. When jack and metal bar are used to push out, the wall material will naturally turn out and form the cold drawn tee blank. Then the pipe segments of a certain length and corresponding specifications are welded on the cold-drawn tee blank formed by ejecting to produce the final product.

Installation method of cold drawing tee machine: firstly, use the opening machine to make holes in the steel pipe, and then clip the mechanical tee into the hole, and seal the hole around by the sealing ring along the pipe wall. Mechanical three - way splice and groove - type two. When connecting the mechanical tee, check the clearance between the mechanical tee and the hole, all parts should be uniform, and then tighten in place; Mechanical tee spacing should not be less than 1m.

Related equipment