Hydraulic tee machine_Cangzhou City Mechanical Equipment Co. Ltd

Product Center

TEE MACHINE

Current position: HOME> Mechanical equipment>

Hydraulic tee machine

Mechanical parameters

Model	1/2”—4”	1”—6”	2”—8”	3”—10”	4”—12”	5”—16”	8”—20”
T wall thickness	Sch40
Maximum pressure	31.5MPa
Pressure of work	25 MPa
In her work	0—1000mm/min
Returns the speed	1500—2000mm/min
Side of the cylinder bore	360mm*2	450mm*2	550mm*2	650mm*2	750mm*2	850mm*2	950mm*2
The side cylinder stroke	300mm	350mm	400mm	450mm	500mm	550mm	600mm
The side cylinder tonnage	250T*2	400T*2	600T*2	850T*2	1100T*2	1400T*2	1600T*2
Master cylinder bore	400mm	500mm	600mm	700mm	800mm	900mm	1000mm
Master cylinder stroke	350mm	400mm	500mm	600mm	700mm	800mm	900mm
Master cylinder tonnage	315T	500T*2	700T	1000T	1200T	1600T	2000T
The motor power	50w	55kw	65kw	75kw	100kw	120kw	170kw

Mechanical video

Equipment details

Hydraulic tee machine

The principle of making tee: through the principle of cold pressure, water pressure is not easy to squeeze change, to squeeze the model of the steel tube, make it fill the mold, forming tee.

Make the process of the tee: the steel pipe placed in the tee mold for cold pressing cold pressing process, control the water pressure to protect the tee wall after extrusion, take out the tee from the mold;

The main components of the machine: oil pump motor PLC control box water tank corresponding model mold and other components;

Scope of application: diameter: 21mm -- 813mm; wall thickness: 2mm -- 30mm;

The advantages and disadvantages:

Advantages: labor saving, fast molding, simple operation, low defective rate, wide selection of materials;

Disadvantages: the cleaning is more cumbersome, long time of the machine will lead to temporary failure;

Related equipment