Carbon steel tee machine_Cangzhou City Mechanical Equipment Co. Ltd

Product Center

TEE MACHINE

Current position: HOME> Mechanical equipment>

Carbon steel tee machine

Mechanical parameters

Processing range	1/2”—4”	1”—6”	2”—8”	3”—10”	4”—12”	5”—16”	8”—20”
Tee thickness	Sch40
Max.pressure	31.5MPa
Working pressure	25 MPa
Working speed	0—1000mm/min
Return speed	1500—2000mm/min
Side cylinder diameter	360mm*2	450mm*2	550mm*2	650mm*2	750mm*2	850mm*2	950mm*2
Side cylinder stroke	300mm	350mm	400mm	450mm	500mm	550mm	600mm
Side cylinder tonnage	250T*2	400T*2	600T*2	850T*2	1100T*2	1400T*2	1600T*2
Master cylinder diameter	400mm	500mm	600mm	700mm	800mm	900mm	1000mm
Master cylinder stroke	350mm	400mm	500mm	600mm	700mm	800mm	900mm
Master cylinder tonnage	315T	500T*2	700T	1000T	1200T	1600T	2000T
The motor power	50kw	55kw	65kw	75kw	100kw	120kw	170kw

Processing range	1/2”—4”	1”—6”	2”—8”	3”—10”	4”—12”	5”—16”	8”—20”
Tee thickness	Sch40
Max.pressure	31.5MPa
Working pressure	25 MPa
Working speed	0—1000mm/min
Return speed	1500—2000mm/min
Side cylinder diameter	360mm*2	450mm*2	550mm*2	650mm*2	750mm*2	850mm*2	950mm*2
Side cylinder stroke	300mm	350mm	400mm	450mm	500mm	550mm	600mm
Side cylinder tonnage	250T*2	400T*2	600T*2	850T*2	1100T*2	1400T*2	1600T*2
Master cylinder diameter	400mm	500mm	600mm	700mm	800mm	900mm	1000mm
Master cylinder stroke	350mm	400mm	500mm	600mm	700mm	800mm	900mm
Master cylinder tonnage	315T	500T*2	700T	1000T	1200T	1600T	2000T
The motor power	50kw	55kw	65kw	75kw	100kw	120kw	170kw

Processing range	1/2”—4”	1”—6”	2”—8”	3”—10”	4”—12”	5”—16”	8”—20”
Tee thickness	Sch40
Max.pressure	31.5MPa
Working pressure	25 MPa
Working speed	0—1000mm/min
Return speed	1500—2000mm/min
Side cylinder diameter	360mm*2	450mm*2	550mm*2	650mm*2	750mm*2	850mm*2	950mm*2
Side cylinder stroke	300mm	350mm	400mm	450mm	500mm	550mm	600mm
Side cylinder tonnage	250T*2	400T*2	600T*2	850T*2	1100T*2	1400T*2	1600T*2
Master cylinder diameter	400mm	500mm	600mm	700mm	800mm	900mm	1000mm
Master cylinder stroke	350mm	400mm	500mm	600mm	700mm	800mm	900mm
Master cylinder tonnage	315T	500T*2	700T	1000T	1200T	1600T	2000T
The motor power	50kw	55kw	65kw	75kw	100kw	120kw	170kw

Processing range	1/2”—4”	1”—6”	2”—8”	3”—10”	4”—12”	5”—16”	8”—20”
Tee thickness	Sch40
Max.pressure	31.5MPa
Working pressure	25 MPa
Working speed	0—1000mm/min
Return speed	1500—2000mm/min
Side cylinder diameter	360mm*2	450mm*2	550mm*2	650mm*2	750mm*2	850mm*2	950mm*2
Side cylinder stroke	300mm	350mm	400mm	450mm	500mm	550mm	600mm
Side cylinder tonnage	250T*2	400T*2	600T*2	850T*2	1100T*2	1400T*2	1600T*2
Master cylinder diameter	400mm	500mm	600mm	700mm	800mm	900mm	1000mm
Master cylinder stroke	350mm	400mm	500mm	600mm	700mm	800mm	900mm
Master cylinder tonnage	315T	500T*2	700T	1000T	1200T	1600T	2000T
The motor power	50kw	55kw	65kw	75kw	100kw	120kw	170kw

Mechanical video

Equipment details

Carbon steel tee machine

The forming principle of three-way machine: first put the tube billet into the lower die cavity, under the action of the hydraulic cylinder, the plunger head is pressed into both ends of the pipe fitting, so that the pipe fitting cavity is sealed, and then the liquid medium is injected into the pipe fitting cavity through the liquid channel in the push head;At this point, the upper die moves down and forms a closed cavity together with the lower die. Finally, the high pressure pump and valve control the liquid pressure to expand continuously, the push head pushes the pipe fittings inward, the pipe wall deforms and gradually fits tightly with the inner wall of the die, and the tee is formed.This three-way machine is used for the formation of three-way, the main power is hydraulic cylinder.Tee diameter from 21mm-630mm, wall thickness from 3mm-20mm we can do, hydraulic cold extrusion tee machine is suitable for carbon steel, stainless steel and some alloy steel.

Carbon steel tee machine process: first of all to be prepared for the preparation of material, check whether the mold is intact and install flattening mould, mould axis of the installation, up and down side face flat, tube flattening, the short axis size is about 325 mm, then the local heating of tube billet and a compression package no fold (director), local heating tube billet and secondary packaging that is closing up and down.The package is punched to deburr, and the semi-finished products after the production of the three-way machine are to be coated with lubricant.The next step is the local heating of the open tube billet, namely hot drawing, heated to 1030-1000 degrees Celsius, put it into the mold, branch tube drawing, reheating, drawing into the mold, and finally heating correction.Oval, crack and pit are not allowed during appearance inspection.The process of heat treatment is normalizing + tempering.Mechanical shot blasting and end machining are for descaling and machining three ports.

Cold drawn tee machine

Cold drawing tee machine is suitable for the production process of carbon steel, stainless steel, and even some alloy steel tee.According to the different specifications of the three - way material.After blanking to sandblasting, to remove the surface of the iron oxide before forming.Forming is formed by hydraulic bulging method.There is a mold, the bottom of the mold is straight, the top has a flange hole.After the pipe is put in, the pipe is fixed with a hydraulic cylinder, and the liquid is filled on both sides to bulge inward, and the pipe is squeezed into a "convex" shape, and then the bulge is cut off from the appropriate position, and the groove is also made.It's shot blasted twice.Because there is work hardening in the process, heat treatment is also required.

Different from the cold drawing tee machine, the metal of the branch pipe of the hot pressing tee is compensated by the radial movement of the billet, so it is also called the radial compensation process.The tonnage of the equipment required for material forming is reduced due to the use of heated and pressed tees.Hot pressing tee has wide adaptability to materials, suitable for low carbon steel, alloy steel, stainless steel materials;Especially for tee with large diameter and thick pipe wall, this hot embossing process is usually adopted.

206-207.

Related equipment